Gentoo.LinuxHowtos.org howtos, tips&tricks and tutorials for gentoo linux

from small one page howto to huge articles all in one place

Other .linuxhowtos.org sites: www.linuxhowtos.org
toolsntoys.linuxhowtos.org

Last additions:

How to make X listen on port 6000

words:

views:

78440

userrating:

average rating: 1.1 (26 votes) (1=very good 6=terrible)

May, 25th 2007:

Words

496

why adblockers are bad

April, 26th 2007:

Words

Website translation planned

Apr, 10th. 2007:

Words

Compile Time Estimator integrated into genlop

You are here: Portage

Details of sys-kernel/genkernel:

Description: Gentoo automatic kernel building scripts
Homepage: https://wiki.gentoo.org/wiki/Genkernel https://gitweb.gentoo.org/proj/genkernel.git/

available versions:

releases	alpha	amd64	arm	hppa	ia64	mips	ppc	ppc64	ppc macos	s390	sh	sparc	x86	USE-Flags	dependencies	ebuild warnings
genkernel-9999	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware systemd	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.17-r1	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware systemd	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.17	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware systemd	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.16-r5	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware systemd	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.16-r4	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware systemd	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.16-r3	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware systemd	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.16-r2	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware systemd	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.16	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.15	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.14	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.12-r1	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.12	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.11	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show
genkernel-4.3.10	-	-	-	-	-	-	-	-	-	-	-	-	-	ibm +firmware	show	Genkernel v4.x is a new major release which touches nearly everything. Be careful, read updated manpage and pay special attention to program output regarding changed kernel command-line parameters! kernel-genkernel-- vmlinuz- ${EROOT}/etc/genkernel.conf IMPORTANT: SSH is currently enabled in your genkernel config file (${gk_config}). However, 'dosshd' is missing from current kernel command-line. You MUST add 'dosshd' to keep sshd enabled in genkernel v4+ initramfs! WARNING: Multiple root arguments (root=) on kernel command-line detected! If you are appending non-persistent device names to kernel command-line, next reboot could fail in case running system and initramfs do not agree on detected root device name! Found the following problematic permissions: ${permission_run} /run Expected: ${permission_run_expected} /run This is known to be causing problems for any UDEV-enabled service. show

Legend:
+ stable
~ testing
- not available
some ebuild warning depend on specific use-flags or architectures, all ebuild-warnings are shown.

Known bugs:

bug ID	component	assigned to	status	description	last change
373903	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel: initramfs does not open luks container if gpg-encrypted passphases are used	2011-07-08 17:41:51
389361	Core system	genkernel	UNCONFIRMED	sys-kernel/genkernel-3.4.16 dmraid advises user to install obsolete device-mapper package	2012-01-31 02:42:48
391443	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel doesnt autodetect the key device if at other address than specified	2012-05-12 20:33:06
395095	genkernel	genkernel	UNCONFIRMED	genkernel add support for custom location of boot config file	2011-12-17 22:26:49
398473	genkernel	genkernel	UNCONFIRMED	[patch] sys-kernel/genkernel v86d support	2012-01-12 17:13:07
398477	genkernel	genkernel	UNCONFIRMED	[patch] sys-kernel/genkernel tuxonice-userui support	2012-01-12 17:15:12
398601	genkernel	genkernel	UNCONFIRMED	[patch] sys-kernel/genkernel few fixes to splash handling	2012-01-12 17:17:06
399265	genkernel	genkernel	UNCONFIRMED	genkernel should use menu.lst as default for GRUB_CONF	2012-04-13 05:44:28
401149	genkernel	genkernel	UNCONFIRMED	computer hangs before shutdown with genkernel config when trying suspend to ram	2012-01-28 10:25:48
418463	genkernel	genkernel	UNCONFIRMED	linuxrc in genkernel's initramfs does not properly deal with bind mounts	2012-07-21 17:31:55
420949	genkernel	genkernel	UNCONFIRMED	Genkernel fails to build busybox for non-default linker ABI	2012-11-11 20:22:02
424637	Core system	systemd	UNCONFIRMED	sys-apps/systemd won't work with lvm due to udev and genkernel problems	2012-07-07 09:32:46
426338	genkernel	genkernel	UNCONFIRMED	genkernel 3.4.24_p2: missing separator between old and new kernel version	2012-12-03 20:03:30
439214	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel-3.4.44.2 and sys-fs/mdadm-3.2.3-r2; no auto-detection even with mdadm.conf?	2013-01-04 19:27:33
442078	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel-3.4.45 - wrong lvm.static usage	2013-01-04 17:15:11
442102	genkernel	genkernel	UNCONFIRMED	Add bepo keymap support to genkernel	2012-11-06 20:57:30
444574	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel-3.4.45: genkernel/defaults/linuxrc does not handle spaces right	2012-11-24 18:40:17
444932	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel-3.4.45: no rtc support with newer kernels	2013-02-20 03:36:21
444934	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel-3.4.45: no support for iptables target LOG with gentoo-sources-3.5.7	2012-12-13 12:03:26
446916	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel-3.4.45 produces bad volume names with --dmraid option	2012-12-12 01:41:14
447100	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel should have an option to avoid firmware installation at all	2013-02-17 11:31:29
447328	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel-3.4.45: encrypted filesystems from initramfs.mounts cannot be mounted	2012-12-15 11:14:42
448156	Core system	genkernel	UNCONFIRMED	Genkernel creates broken initramfs image - wrong lvm links blocks booting to a LVM rootfs	2013-02-17 02:24:54
448248	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel-3.4.45 does not update /etc/genkernel.conf	2012-12-26 11:40:15
448624	genkernel	genkernel	UNCONFIRMED	last step of compile_kernel() does not respect ${KERNEL_OUTPUTDIR} in genkernel-3.4.45	2012-12-26 01:26:22
452746	genkernel	genkernel	UNCONFIRMED	genkernel(8) ramdisk options text	2013-01-17 22:52:13
453742	genkernel	genkernel	UNCONFIRMED	genkernel 3.4.24_p2 cannot build UVC driver for USB webcam - In function `usbvision_write_reg_irq':	2013-01-28 04:52:09
454780	Core system	genkernel	UNCONFIRMED	sys-kernel/genkernel-3.4.45 - initramfs unable to switch on real-root on /dev/sdax	2013-02-01 22:15:24
455266	genkernel	genkernel	UNCONFIRMED	=sys-kernel/genkernel-3.4.45 inoperable --disklabel option	2013-02-05 11:27:40
455518	genkernel	genkernel	UNCONFIRMED	sys-kernel/genkernel does not suppert hex numbers in root= kernel commandline	2013-02-05 12:30:20

back

New Packages

- as

- as

2025-07-19

atuin - 18.7.1

Ebuild name:

app-shells/atuin-18.7.1

Description

Shell history manager supporting encrypted synchronisation

Added to portage

2025-07-19

bash - 5.4_alpha_pre20250718

Ebuild name:

app-shells/bash-5.4_alpha_pre20250718

Description

The standard GNU Bourne again shell

Added to portage

2025-07-19

camlp5 - 8.03.06

Ebuild name:

dev-ml/camlp5-8.03.06

Description

A preprocessor-pretty-printer of ocaml

Added to portage

2025-07-19

ebuild-mode - 1.79

Ebuild name:

app-xemacs/ebuild-mode-1.79

Description

Emacs modes for editing ebuilds and other Gentoo specific files

Added to portage

2025-07-19

pcre2-ocaml - 8.0.3

Ebuild name:

dev-ml/pcre2-ocaml-8.0.3

Description

OCaml bindings to PCRE (Perl Compatibility Regular Expressions)

Added to portage

2025-07-19

profanity - 0.15.0

Ebuild name:

net-im/profanity-0.15.0

Description

A console based XMPP client inspired by Irssi

Added to portage

2025-07-19

vivaldi - 7.5.3735.54

Ebuild name:

www-client/vivaldi-7.5.3735.54

Description

A browser for our friends

Added to portage

2025-07-19

2025-07-18

apache-arrow - 21.0.0

Ebuild name:

dev-libs/apache-arrow-21.0.0

Description

A cross-language development platform for in-memory data

Added to portage

2025-07-18

awscli - 1.41.8

Ebuild name:

app-admin/awscli-1.41.8

Description

Universal Command Line Environment for AWS

Added to portage

2025-07-18

boto3 - 1.39.8

Ebuild name:

dev-python/boto3-1.39.8

Description

The AWS SDK for Python

Added to portage

2025-07-18

botocore - 1.39.8

Ebuild name:

dev-python/botocore-1.39.8

Description

Low-level, data-driven core of boto 3

Added to portage

2025-07-18

c-blosc2 - 2.19.1

Ebuild name:

dev-libs/c-blosc2-2.19.1

Description

Blocking, shuffling and lossless compression library

Added to portage

2025-07-18

collectd - 5.12.0-r12

Ebuild name:

app-metrics/collectd-5.12.0-r12

Description

Collects system statistics and provides mechanisms to store the val

Added to portage

2025-07-18

cpuinfo - 2025.03.21

Ebuild name:

dev-libs/cpuinfo-2025.03.21

Description

CPU INFOrmation library

Added to portage

2025-07-18

dist-kernel - 5.10.240

Ebuild name:

virtual/dist-kernel-5.10.240

Description

Virtual to depend on any Distribution Kernel

Added to portage

2025-07-18

dist-kernel - 5.15.189

Ebuild name:

virtual/dist-kernel-5.15.189

Description

Virtual to depend on any Distribution Kernel

Added to portage

2025-07-18

dist-kernel - 6.1.146

Ebuild name:

virtual/dist-kernel-6.1.146

Description

Virtual to depend on any Distribution Kernel

Added to portage

2025-07-18

dist-kernel - 6.12.39

Ebuild name:

virtual/dist-kernel-6.12.39

Description

Virtual to depend on any Distribution Kernel

Added to portage

2025-07-18

dist-kernel - 6.15.7

Ebuild name:

virtual/dist-kernel-6.15.7

Description

Virtual to depend on any Distribution Kernel

Added to portage

2025-07-18

dist-kernel - 6.6.99

Ebuild name:

virtual/dist-kernel-6.6.99

Description

Virtual to depend on any Distribution Kernel

Added to portage

2025-07-18

distlib - 0.4.0

Ebuild name:

dev-python/distlib-0.4.0

Description

Low-level components of distutils2/packaging

Added to portage

2025-07-18

elt-patches - 20250718

Ebuild name:

app-portage/elt-patches-20250718

Description

Collection of patches for libtool.eclass

Added to portage

2025-07-18

fastfetch - 2.48.1

Ebuild name:

app-misc/fastfetch-2.48.1

Description

Fast neofetch-like system information tool

Added to portage

2025-07-18

freeradius - 3.2.6-r1

Ebuild name:

net-dialup/freeradius-3.2.6-r1

Description

Highly configurable free RADIUS server

Added to portage

2025-07-18

gentoo-kernel - 5.10.240

Ebuild name:

sys-kernel/gentoo-kernel-5.10.240

Description

Linux kernel built with Gentoo patches

Added to portage

2025-07-18

gentoo-kernel - 5.15.189

Ebuild name:

sys-kernel/gentoo-kernel-5.15.189

Description

Linux kernel built with Gentoo patches

Added to portage

2025-07-18

gentoo-kernel - 6.1.146

Ebuild name:

sys-kernel/gentoo-kernel-6.1.146

Description

Linux kernel built with Gentoo patches

Added to portage

2025-07-18

gentoo-kernel - 6.12.39

Ebuild name:

sys-kernel/gentoo-kernel-6.12.39

Description

Linux kernel built with Gentoo patches

Added to portage

2025-07-18

gentoo-kernel - 6.15.7

Ebuild name:

sys-kernel/gentoo-kernel-6.15.7

Description

Linux kernel built with Gentoo patches

Added to portage

2025-07-18

gentoo-kernel - 6.6.99

Ebuild name:

sys-kernel/gentoo-kernel-6.6.99

Description

Linux kernel built with Gentoo patches

Added to portage

2025-07-18

gentoo-kernel-bin - 5.10.240

Ebuild name:

sys-kernel/gentoo-kernel-bin-5.10.240

Description

Pre-built Linux kernel with Gentoo patches

Added to portage

2025-07-18

gentoo-kernel-bin - 5.15.189

Ebuild name:

sys-kernel/gentoo-kernel-bin-5.15.189

Description

Pre-built Linux kernel with Gentoo patches

Added to portage

2025-07-18

gentoo-kernel-bin - 6.1.146

Ebuild name:

sys-kernel/gentoo-kernel-bin-6.1.146

Description

Pre-built Linux kernel with Gentoo patches

Added to portage

2025-07-18

gentoo-kernel-bin - 6.12.39

Ebuild name:

sys-kernel/gentoo-kernel-bin-6.12.39

Description

Pre-built Linux kernel with Gentoo patches

Added to portage

2025-07-18

gentoo-kernel-bin - 6.15.7

Ebuild name:

sys-kernel/gentoo-kernel-bin-6.15.7

Description

Pre-built Linux kernel with Gentoo patches

Added to portage

2025-07-18

gentoo-kernel-bin - 6.6.99

Ebuild name:

sys-kernel/gentoo-kernel-bin-6.6.99

Description

Pre-built Linux kernel with Gentoo patches

Added to portage

2025-07-18

gentoo-sources - 5.10.240

Ebuild name:

sys-kernel/gentoo-sources-5.10.240

Description

Full sources including the Gentoo patchset for the . kernel tree

Added to portage

2025-07-18

gentoo-sources - 5.15.189

Ebuild name:

sys-kernel/gentoo-sources-5.15.189

Description

Full sources including the Gentoo patchset for the . kernel tree

Added to portage

2025-07-18

gentoo-sources - 6.1.146

Ebuild name:

sys-kernel/gentoo-sources-6.1.146

Description

Full sources including the Gentoo patchset for the . kernel tree

Added to portage

2025-07-18

gentoo-sources - 6.12.39

Ebuild name:

sys-kernel/gentoo-sources-6.12.39

Description

Full sources including the Gentoo patchset for the . kernel tree

Added to portage

2025-07-18

gentoo-sources - 6.15.7

Ebuild name:

sys-kernel/gentoo-sources-6.15.7

Description

Full sources including the Gentoo patchset for the . kernel tree

Added to portage

2025-07-18

gentoo-sources - 6.6.99

Ebuild name:

sys-kernel/gentoo-sources-6.6.99

Description

Full sources including the Gentoo patchset for the . kernel tree

Added to portage

2025-07-18

grafana-bin - 11.4.6

Ebuild name:

www-apps/grafana-bin-11.4.6

Description

Gorgeous metric viz, dashboards & editors for Graphite, InfluxDB & Open

Added to portage

2025-07-18

grafana-bin - 11.5.6

Ebuild name:

www-apps/grafana-bin-11.5.6

Description

Gorgeous metric viz, dashboards & editors for Graphite, InfluxDB & Open

Added to portage

2025-07-18

grafana-bin - 12.0.2

Ebuild name:

www-apps/grafana-bin-12.0.2

Description

Gorgeous metric viz, dashboards & editors for Graphite, InfluxDB & Open

Added to portage

2025-07-18

hydra - 9.5-r11

Ebuild name:

net-analyzer/hydra-9.5-r11

Description

Parallelized network login hacker

Added to portage

2025-07-18

iwdevtools - 0.13.0

Ebuild name:

app-portage/iwdevtools-0.13.0

Description

Small tools to aid with Gentoo development, primarily intended for QA

Added to portage

2025-07-18

json - 2.13.0

Ebuild name:

dev-ruby/json-2.13.0

Description

A JSON implementation as a Ruby extension

Added to portage

2025-07-18

jsonschema - 4.24.1

Ebuild name:

dev-python/jsonschema-4.24.1

Description

An implementation of JSON-Schema validation for Python

Added to portage

2025-07-18

ktextaddons - 1.6.0

Ebuild name:

dev-libs/ktextaddons-1.6.0

Description

Various text handling addons

Added to portage

2025-07-18

libqalculate - 5.6.0

Ebuild name:

sci-libs/libqalculate-5.6.0

Description

A modern multi-purpose calculator library

Added to portage

2025-07-18

mkl - 2025.2.0.628

Ebuild name:

sci-libs/mkl-2025.2.0.628

Description

Intel Math Kernel Library

Added to portage

2025-07-18

mongodb-compass-bin - 1.46.6

Ebuild name:

dev-db/mongodb-compass-bin-1.46.6

Description

GUI for MongoDB

Added to portage

2025-07-18

narwhals - 1.47.1

Ebuild name:

dev-python/narwhals-1.47.1

Description

Extremely lightweight compatibility layer between dataframe libraries

Added to portage

2025-07-18

netdata-go-plugin - 1.47.5-r1

Ebuild name:

net-analyzer/netdata-go-plugin-1.47.5-r1

Description

Netdata plugin for collectors written in Go

Added to portage

2025-07-18

nh3 - 0.3.0

Ebuild name:

dev-python/nh3-0.3.0

Description

Ammonia HTML sanitizer Python binding

Added to portage

2025-07-18

nspr - 4.37

Ebuild name:

dev-libs/nspr-4.37

Description

Netscape Portable Runtime

Added to portage

2025-07-18

nvidia-cuda-toolkit - 12.9.1

Ebuild name:

dev-util/nvidia-cuda-toolkit-12.9.1

Description

NVIDIA CUDA Toolkit (compiler and friends)

Added to portage

2025-07-18

opendkim - 2.10.3-r34

Ebuild name:

mail-filter/opendkim-2.10.3-r34

Description

A milter providing DKIM signing and verification

Added to portage

2025-07-18

pgmemcache - 2.3.0-r1

Ebuild name:

dev-db/pgmemcache-2.3.0-r1

Description

A PostgreSQL API based on libmemcached to interface with memcached

Added to portage

2025-07-18

pgpool2 - 4.4.7-r1

Ebuild name:

dev-db/pgpool2-4.4.7-r1

Description

Connection pool server for PostgreSQL

Added to portage

2025-07-18

pikepdf - 9.10.2

Ebuild name:

dev-python/pikepdf-9.10.2

Description

Python library to work with pdf files based on qpdf

Added to portage

2025-07-18

postfix - 3.11_pre20250717

Ebuild name:

mail-mta/postfix-3.11_pre20250717

Description

A fast and secure drop-in replacement for sendmail

Added to portage

2025-07-18

postgresql - 18_beta2

Ebuild name:

dev-db/postgresql-18_beta2

Description

PostgreSQL RDBMS

Added to portage

2025-07-18

proftpd - 1.3.9-r2

Ebuild name:

net-ftp/proftpd-1.3.9-r2

Description

An advanced and very configurable FTP server

Added to portage

2025-07-18

pyarrow - 21.0.0

Ebuild name:

dev-python/pyarrow-21.0.0

Description

Python library for Apache Arrow

Added to portage

2025-07-18

pylibmc - 1.6.3-r2

Ebuild name:

dev-python/pylibmc-1.6.3-r2

Description

Libmemcached wrapper written as a Python extension

Added to portage

2025-07-18

pytest-lazy-fixtures - 1.3.2

Ebuild name:

dev-python/pytest-lazy-fixtures-1.3.2

Description

Allows you to use fixtures in @pytest.mark.parametrize

Added to portage

2025-07-18

pytest-services - 2.2.2

Ebuild name:

dev-python/pytest-services-2.2.2

Description

Collection of fixtures and utility functions to run service proces

Added to portage

2025-07-18

qalculate-gtk - 5.6.0

Ebuild name:

sci-calculators/qalculate-gtk-5.6.0

Description

Modern multi-purpose calculator

Added to portage

2025-07-18

qalculate-qt - 5.6.0

Ebuild name:

sci-calculators/qalculate-qt-5.6.0

Description

Qt-based UI for libqalculate

Added to portage

2025-07-18

recog - 3.1.18

Ebuild name:

dev-ruby/recog-3.1.18

Description

Pattern recognition for hosts, services, and content

Added to portage

2025-07-18

rencode - 1.0.8-r1

Ebuild name:

dev-python/rencode-1.0.8-r1

Description

Serialization similar to bencode from the BitTorrent project

Added to portage

2025-07-18

sigil - 2.6.0

Ebuild name:

app-text/sigil-2.6.0

Description

Multi-platform WYSIWYG ebook editor for ePub format

Added to portage

2025-07-18

simplecov-html - 0.13.2

Ebuild name:

dev-ruby/simplecov-html-0.13.2

Description

Generates a HTML report of your SimpleCov ruby code coverage results

Added to portage

2025-07-18

sogo - 5.2.0-r1

Ebuild name:

gnustep-apps/sogo-5.2.0-r1

Description

Groupware server built around OpenGroupware.org and the SOPE application

Added to portage

2025-07-18

supercollider - 3.14.0_rc2

Ebuild name:

media-sound/supercollider-3.14.0_rc2

Description

Environment and programming language for real time audio synth

Added to portage

2025-07-18

thunar - 4.20.4

Ebuild name:

xfce-base/thunar-4.20.4

Description

File manager for the Xfce desktop environment

Added to portage

2025-07-18

uv - 0.7.22

Ebuild name:

dev-python/uv-0.7.22

Description

A Python package installer and resolver, written in Rust

Added to portage

2025-07-18

uv-build - 0.7.22

Ebuild name:

dev-python/uv-build-0.7.22

Description

PEP517 uv build backend

Added to portage

2025-07-18

vanilla-kernel - 5.10.240

Ebuild name:

sys-kernel/vanilla-kernel-5.10.240

Description

Linux kernel built from vanilla upstream sources

Added to portage

2025-07-18

vanilla-kernel - 5.15.189

Ebuild name:

sys-kernel/vanilla-kernel-5.15.189

Description

Linux kernel built from vanilla upstream sources

Added to portage

2025-07-18

vanilla-kernel - 6.1.146

Ebuild name:

sys-kernel/vanilla-kernel-6.1.146

Description

Linux kernel built from vanilla upstream sources

Added to portage

2025-07-18

vanilla-kernel - 6.12.39

Ebuild name:

sys-kernel/vanilla-kernel-6.12.39

Description

Linux kernel built from vanilla upstream sources

Added to portage

2025-07-18

vanilla-kernel - 6.15.7

Ebuild name:

sys-kernel/vanilla-kernel-6.15.7

Description

Linux kernel built from vanilla upstream sources

Added to portage

2025-07-18

vanilla-kernel - 6.6.99

Ebuild name:

sys-kernel/vanilla-kernel-6.6.99

Description

Linux kernel built from vanilla upstream sources

Added to portage

2025-07-18

vanilla-sources - 5.10.240

Ebuild name:

sys-kernel/vanilla-sources-5.10.240

Description

Full sources for the Linux kernel

Added to portage

2025-07-18

vanilla-sources - 5.15.189

Ebuild name:

sys-kernel/vanilla-sources-5.15.189

Description

Full sources for the Linux kernel

Added to portage

2025-07-18

vanilla-sources - 5.4.296

Ebuild name:

sys-kernel/vanilla-sources-5.4.296

Description

Full sources for the Linux kernel

Added to portage

2025-07-18

vanilla-sources - 6.1.146

Ebuild name:

sys-kernel/vanilla-sources-6.1.146

Description

Full sources for the Linux kernel

Added to portage

2025-07-18

vanilla-sources - 6.12.39

Ebuild name:

sys-kernel/vanilla-sources-6.12.39

Description

Full sources for the Linux kernel

Added to portage

2025-07-18

vanilla-sources - 6.15.7

Ebuild name:

sys-kernel/vanilla-sources-6.15.7

Description

Full sources for the Linux kernel

Added to portage

2025-07-18

vanilla-sources - 6.6.99

Ebuild name:

sys-kernel/vanilla-sources-6.6.99

Description

Full sources for the Linux kernel

Added to portage

2025-07-18

yaz - 5.35.1-r1

Ebuild name:

dev-libs/yaz-5.35.1-r1

Description

C/C++ toolkit for Z39.50v3 clients and servers

Added to portage

2025-07-18

yubikey-manager - 5.7.0-r2

Ebuild name:

app-crypt/yubikey-manager-5.7.0-r2

Description

Python library and command line tool for configuring a YubiKey

Added to portage

2025-07-18

yubikey-manager - 5.7.2

Ebuild name:

app-crypt/yubikey-manager-5.7.2

Description

Python library and command line tool for configuring a YubiKey

Added to portage

2025-07-18

yubikey-manager-qt - 1.2.5

Ebuild name:

app-crypt/yubikey-manager-qt-1.2.5

Description

Cross-platform application for configuring any YubiKey over all

Added to portage

2025-07-18

yubioath-flutter-bin - 6.1.0-r3

Ebuild name:

app-crypt/yubioath-flutter-bin-6.1.0-r3

Description

Yubico Authenticator for TOTP

Added to portage

2025-07-18

- Powered by

- Running on

- Level Triple-A Conformance to Web Content Accessibility Guidelines 1.0 -
- Copyright and legal notices -
Time to create this page: 42.8 ms